High voltage LED indicator 40-1000 VDC without additional power supplyHigh Voltage Power Supply DesignBackup...

A newer friend of my brother's gave him a load of baseball cards that are supposedly extremely valuable. Is this a scam?

What is a clear way to write a bar that has an extra beat?

Maximum likelihood parameters deviate from posterior distributions

Can a Cauchy sequence converge for one metric while not converging for another?

How can I prevent hyper evolved versions of regular creatures from wiping out their cousins?

tikz convert color string to hex value

How old can references or sources in a thesis be?

Approximately how much travel time was saved by the opening of the Suez Canal in 1869?

Does an object always see its latest internal state irrespective of thread?

Watching something be written to a file live with tail

What are these boxed doors outside store fronts in New York?

Can you really stack all of this on an Opportunity Attack?

"You are your self first supporter", a more proper way to say it

Are astronomers waiting to see something in an image from a gravitational lens that they've already seen in an adjacent image?

What's that red-plus icon near a text?

Is it unprofessional to ask if a job posting on GlassDoor is real?

Why is 150k or 200k jobs considered good when there's 300k+ births a month?

Was any UN Security Council vote triple-vetoed?

What does it mean to describe someone as a butt steak?

Can an x86 CPU running in real mode be considered to be basically an 8086 CPU?

When a company launches a new product do they "come out" with a new product or do they "come up" with a new product?

If human space travel is limited by the G force vulnerability, is there a way to counter G forces?

Is it tax fraud for an individual to declare non-taxable revenue as taxable income? (US tax laws)

Fully-Firstable Anagram Sets



High voltage LED indicator 40-1000 VDC without additional power supply


High Voltage Power Supply DesignBackup power supply with ledLED Strip Light - Power supply issuesPrecision High Voltage Power Supply Design?High Voltage Indicator based on specific threshold valueLED Strip setup on stairs. Unsure which power supply will work for 1200 LEDsPowering high power LEDs without resistorsPowering 3.3v-5V LED strip with 18650 batteriesHow supply or flash a LED with a low power solar cell?Power indicator for circuits with voltages much higher than LED forward voltages (say 15-48V)






.everyoneloves__top-leaderboard:empty,.everyoneloves__mid-leaderboard:empty,.everyoneloves__bot-mid-leaderboard:empty{ margin-bottom:0;
}







5












$begingroup$


I would like to make an indicator to show that DC bus (700VDC) capacitors are charged (be careful!).



What is the best way to make a LED indicator, which will work for a long time from 40VDC to 1000VDC without additional power supply and with minimum power losses?










share|improve this question









New contributor




Nikolay is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.







$endgroup$












  • $begingroup$
    "work with" how? What is the intention?
    $endgroup$
    – Eugene Sh.
    11 hours ago










  • $begingroup$
    at what? constant current?
    $endgroup$
    – Sunnyskyguy EE75
    11 hours ago










  • $begingroup$
    it should show us that DC bus capacitors are charged
    $endgroup$
    – Nikolay
    11 hours ago






  • 1




    $begingroup$
    Welcome to EE.SE! Keep in mind that questions about optimization (i.e., "What is the best ...?") require a definition about what problem dimensions are to be optimized for your application, such as size, speed, energy consumption, user experience, etc. Since these can't be optimized all at once, you need to have a good idea of which ones are most important to you, and be able to articulate that clearly to us.
    $endgroup$
    – Dave Tweed
    11 hours ago










  • $begingroup$
    ie. you need to supply measureable specs for the LED indicator current and perhaps you want to specify OVP too for 1kV on 700Vdc caps and max. power for this load
    $endgroup$
    – Sunnyskyguy EE75
    11 hours ago




















5












$begingroup$


I would like to make an indicator to show that DC bus (700VDC) capacitors are charged (be careful!).



What is the best way to make a LED indicator, which will work for a long time from 40VDC to 1000VDC without additional power supply and with minimum power losses?










share|improve this question









New contributor




Nikolay is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.







$endgroup$












  • $begingroup$
    "work with" how? What is the intention?
    $endgroup$
    – Eugene Sh.
    11 hours ago










  • $begingroup$
    at what? constant current?
    $endgroup$
    – Sunnyskyguy EE75
    11 hours ago










  • $begingroup$
    it should show us that DC bus capacitors are charged
    $endgroup$
    – Nikolay
    11 hours ago






  • 1




    $begingroup$
    Welcome to EE.SE! Keep in mind that questions about optimization (i.e., "What is the best ...?") require a definition about what problem dimensions are to be optimized for your application, such as size, speed, energy consumption, user experience, etc. Since these can't be optimized all at once, you need to have a good idea of which ones are most important to you, and be able to articulate that clearly to us.
    $endgroup$
    – Dave Tweed
    11 hours ago










  • $begingroup$
    ie. you need to supply measureable specs for the LED indicator current and perhaps you want to specify OVP too for 1kV on 700Vdc caps and max. power for this load
    $endgroup$
    – Sunnyskyguy EE75
    11 hours ago
















5












5








5





$begingroup$


I would like to make an indicator to show that DC bus (700VDC) capacitors are charged (be careful!).



What is the best way to make a LED indicator, which will work for a long time from 40VDC to 1000VDC without additional power supply and with minimum power losses?










share|improve this question









New contributor




Nikolay is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.







$endgroup$




I would like to make an indicator to show that DC bus (700VDC) capacitors are charged (be careful!).



What is the best way to make a LED indicator, which will work for a long time from 40VDC to 1000VDC without additional power supply and with minimum power losses?







led high-voltage hvdc






share|improve this question









New contributor




Nikolay is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.











share|improve this question









New contributor




Nikolay is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.









share|improve this question




share|improve this question








edited 11 hours ago







Nikolay













New contributor




Nikolay is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.









asked 11 hours ago









NikolayNikolay

262




262




New contributor




Nikolay is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.





New contributor





Nikolay is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.






Nikolay is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.












  • $begingroup$
    "work with" how? What is the intention?
    $endgroup$
    – Eugene Sh.
    11 hours ago










  • $begingroup$
    at what? constant current?
    $endgroup$
    – Sunnyskyguy EE75
    11 hours ago










  • $begingroup$
    it should show us that DC bus capacitors are charged
    $endgroup$
    – Nikolay
    11 hours ago






  • 1




    $begingroup$
    Welcome to EE.SE! Keep in mind that questions about optimization (i.e., "What is the best ...?") require a definition about what problem dimensions are to be optimized for your application, such as size, speed, energy consumption, user experience, etc. Since these can't be optimized all at once, you need to have a good idea of which ones are most important to you, and be able to articulate that clearly to us.
    $endgroup$
    – Dave Tweed
    11 hours ago










  • $begingroup$
    ie. you need to supply measureable specs for the LED indicator current and perhaps you want to specify OVP too for 1kV on 700Vdc caps and max. power for this load
    $endgroup$
    – Sunnyskyguy EE75
    11 hours ago




















  • $begingroup$
    "work with" how? What is the intention?
    $endgroup$
    – Eugene Sh.
    11 hours ago










  • $begingroup$
    at what? constant current?
    $endgroup$
    – Sunnyskyguy EE75
    11 hours ago










  • $begingroup$
    it should show us that DC bus capacitors are charged
    $endgroup$
    – Nikolay
    11 hours ago






  • 1




    $begingroup$
    Welcome to EE.SE! Keep in mind that questions about optimization (i.e., "What is the best ...?") require a definition about what problem dimensions are to be optimized for your application, such as size, speed, energy consumption, user experience, etc. Since these can't be optimized all at once, you need to have a good idea of which ones are most important to you, and be able to articulate that clearly to us.
    $endgroup$
    – Dave Tweed
    11 hours ago










  • $begingroup$
    ie. you need to supply measureable specs for the LED indicator current and perhaps you want to specify OVP too for 1kV on 700Vdc caps and max. power for this load
    $endgroup$
    – Sunnyskyguy EE75
    11 hours ago


















$begingroup$
"work with" how? What is the intention?
$endgroup$
– Eugene Sh.
11 hours ago




$begingroup$
"work with" how? What is the intention?
$endgroup$
– Eugene Sh.
11 hours ago












$begingroup$
at what? constant current?
$endgroup$
– Sunnyskyguy EE75
11 hours ago




$begingroup$
at what? constant current?
$endgroup$
– Sunnyskyguy EE75
11 hours ago












$begingroup$
it should show us that DC bus capacitors are charged
$endgroup$
– Nikolay
11 hours ago




$begingroup$
it should show us that DC bus capacitors are charged
$endgroup$
– Nikolay
11 hours ago




1




1




$begingroup$
Welcome to EE.SE! Keep in mind that questions about optimization (i.e., "What is the best ...?") require a definition about what problem dimensions are to be optimized for your application, such as size, speed, energy consumption, user experience, etc. Since these can't be optimized all at once, you need to have a good idea of which ones are most important to you, and be able to articulate that clearly to us.
$endgroup$
– Dave Tweed
11 hours ago




$begingroup$
Welcome to EE.SE! Keep in mind that questions about optimization (i.e., "What is the best ...?") require a definition about what problem dimensions are to be optimized for your application, such as size, speed, energy consumption, user experience, etc. Since these can't be optimized all at once, you need to have a good idea of which ones are most important to you, and be able to articulate that clearly to us.
$endgroup$
– Dave Tweed
11 hours ago












$begingroup$
ie. you need to supply measureable specs for the LED indicator current and perhaps you want to specify OVP too for 1kV on 700Vdc caps and max. power for this load
$endgroup$
– Sunnyskyguy EE75
11 hours ago






$begingroup$
ie. you need to supply measureable specs for the LED indicator current and perhaps you want to specify OVP too for 1kV on 700Vdc caps and max. power for this load
$endgroup$
– Sunnyskyguy EE75
11 hours ago












4 Answers
4






active

oldest

votes


















5












$begingroup$

Connect a moving coil analog voltmeter across the power bus.



Either a voltmeter as shown with internal series resistor or an external resistor
and scale calibrated for the desired range. Photo from this useless site.



Old-school suppliers such as Crompton should be able to supply a meter with the markings you need, if not a turnkey solution.



enter image description here






share|improve this answer











$endgroup$









  • 1




    $begingroup$
    GMTA .........great alike
    $endgroup$
    – Sunnyskyguy EE75
    11 hours ago



















4












$begingroup$

Something else to consider is to build a relaxation oscillator using a diac, capacitor, LED, couple of resistors.





schematic



Diacs are still readily available, although Digikey wants to sell them in full reels. They can be found at most electronic suppliers as well as places like eBay, aliexpress, banggood, deal extreme.



The advantage of using a relaxation oscillator rather than driving the LED with a large-value resistor is that the LED remains visible (flashing) with low voltages applied. It will stop flashing when the input voltage drops below the sum of the diac trigger voltage and the LED forward voltage,








share|improve this answer









$endgroup$













  • $begingroup$
    Probably the best solution. Only maybe R1 should be 10 M or even more, and the cap under 1uF. Also there are LEDs with 100X light output than the listed one, so R2 can be increased too, which would save power.
    $endgroup$
    – Ale..chenski
    8 hours ago












  • $begingroup$
    I normally use very-high-brightness LEDs. The part number on my schematic is simply what the built-in CAD package has as a default.
    $endgroup$
    – Dwayne Reid
    8 hours ago










  • $begingroup$
    You have to keep the discharge current high enough to ensure that the diac switches cleanly from conducting to not conducting. In other words, R2 has to remain fairly low value. But higher brightness is better anyway.
    $endgroup$
    – Dwayne Reid
    8 hours ago



















4












$begingroup$

example of a reliable economical no-power-supply (< $10) indicator solution that does not cost > $200 like the other meters. :(



Since this coil draws 50uA full scale it is equivalent to 10V/50uA= 200kOhm. and thus at 1kV the R load is 50 mW full scale with 1kV/50uA = 20MOhm 1% or +/-200kOhm.





schematic





simulate this circuit – Schematic created using CircuitLab



It also draws the least current and is readily available.



enter image description here






share|improve this answer











$endgroup$





















    3












    $begingroup$

    Another potential option is to use a neon bulb or lamp. The common neon indicator that I used to use is the NE-2H - this has fairly-wide current capability and would be able to handle the current range of caused by the supply voltage changing from less than 100V up to 1000V.



    The downside is that a neon indicator does not match your requirement of indicating down to 40 Vdc. The NE-2H extinguishes (after being lit) at about 60 Vdc.



    NE-2 & NE-2H indicators are still readily available. There are also much larger neon bulbs and lamps but they may not be readily available any longer. But you can check.



    Final downside of a neon indicator is that they do die after an extended time. You have to weigh the consequences of the indicator failing some time in the future. Do note that they fail "gracefully" - they don't fail completely at one time, but rather, degrade. You would use that degradation as an indication that the lamp needs to be replaced.






    share|improve this answer









    $endgroup$













    • $begingroup$
      I had considered this but discarded it due to the V range must be <<1mA with 1M series R is barely visible at 50uA , but then when it wears out you can reverse it and use the other electrode to illuminate. ha.
      $endgroup$
      – Sunnyskyguy EE75
      10 hours ago










    • $begingroup$
      I had considered suggesting a simple neon relaxation oscillator but the downside is that the minimum operating voltage would be about 90 Vdc. But it doesn't get much simpler than that - and remains quite visible even with low supply voltage.
      $endgroup$
      – Dwayne Reid
      9 hours ago










    • $begingroup$
      Will the neon work on DC power?
      $endgroup$
      – Harper
      4 hours ago










    • $begingroup$
      Yes. Neon works well on DC supply. However, only one electrode illuminates. Neon relaxation oscillator works only with DC power. But minimum operating voltage for relaxation oscillator is the firing voltage of the neon bulb - about 90 Vdc for NE-2H.
      $endgroup$
      – Dwayne Reid
      4 hours ago












    Your Answer





    StackExchange.ifUsing("editor", function () {
    return StackExchange.using("mathjaxEditing", function () {
    StackExchange.MarkdownEditor.creationCallbacks.add(function (editor, postfix) {
    StackExchange.mathjaxEditing.prepareWmdForMathJax(editor, postfix, [["\$", "\$"]]);
    });
    });
    }, "mathjax-editing");

    StackExchange.ifUsing("editor", function () {
    return StackExchange.using("schematics", function () {
    StackExchange.schematics.init();
    });
    }, "cicuitlab");

    StackExchange.ready(function() {
    var channelOptions = {
    tags: "".split(" "),
    id: "135"
    };
    initTagRenderer("".split(" "), "".split(" "), channelOptions);

    StackExchange.using("externalEditor", function() {
    // Have to fire editor after snippets, if snippets enabled
    if (StackExchange.settings.snippets.snippetsEnabled) {
    StackExchange.using("snippets", function() {
    createEditor();
    });
    }
    else {
    createEditor();
    }
    });

    function createEditor() {
    StackExchange.prepareEditor({
    heartbeatType: 'answer',
    autoActivateHeartbeat: false,
    convertImagesToLinks: false,
    noModals: true,
    showLowRepImageUploadWarning: true,
    reputationToPostImages: null,
    bindNavPrevention: true,
    postfix: "",
    imageUploader: {
    brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
    contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
    allowUrls: true
    },
    onDemand: true,
    discardSelector: ".discard-answer"
    ,immediatelyShowMarkdownHelp:true
    });


    }
    });






    Nikolay is a new contributor. Be nice, and check out our Code of Conduct.










    draft saved

    draft discarded


















    StackExchange.ready(
    function () {
    StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2felectronics.stackexchange.com%2fquestions%2f430950%2fhigh-voltage-led-indicator-40-1000-vdc-without-additional-power-supply%23new-answer', 'question_page');
    }
    );

    Post as a guest















    Required, but never shown

























    4 Answers
    4






    active

    oldest

    votes








    4 Answers
    4






    active

    oldest

    votes









    active

    oldest

    votes






    active

    oldest

    votes









    5












    $begingroup$

    Connect a moving coil analog voltmeter across the power bus.



    Either a voltmeter as shown with internal series resistor or an external resistor
    and scale calibrated for the desired range. Photo from this useless site.



    Old-school suppliers such as Crompton should be able to supply a meter with the markings you need, if not a turnkey solution.



    enter image description here






    share|improve this answer











    $endgroup$









    • 1




      $begingroup$
      GMTA .........great alike
      $endgroup$
      – Sunnyskyguy EE75
      11 hours ago
















    5












    $begingroup$

    Connect a moving coil analog voltmeter across the power bus.



    Either a voltmeter as shown with internal series resistor or an external resistor
    and scale calibrated for the desired range. Photo from this useless site.



    Old-school suppliers such as Crompton should be able to supply a meter with the markings you need, if not a turnkey solution.



    enter image description here






    share|improve this answer











    $endgroup$









    • 1




      $begingroup$
      GMTA .........great alike
      $endgroup$
      – Sunnyskyguy EE75
      11 hours ago














    5












    5








    5





    $begingroup$

    Connect a moving coil analog voltmeter across the power bus.



    Either a voltmeter as shown with internal series resistor or an external resistor
    and scale calibrated for the desired range. Photo from this useless site.



    Old-school suppliers such as Crompton should be able to supply a meter with the markings you need, if not a turnkey solution.



    enter image description here






    share|improve this answer











    $endgroup$



    Connect a moving coil analog voltmeter across the power bus.



    Either a voltmeter as shown with internal series resistor or an external resistor
    and scale calibrated for the desired range. Photo from this useless site.



    Old-school suppliers such as Crompton should be able to supply a meter with the markings you need, if not a turnkey solution.



    enter image description here







    share|improve this answer














    share|improve this answer



    share|improve this answer








    edited 10 hours ago

























    answered 11 hours ago









    Spehro PefhanySpehro Pefhany

    213k5162429




    213k5162429








    • 1




      $begingroup$
      GMTA .........great alike
      $endgroup$
      – Sunnyskyguy EE75
      11 hours ago














    • 1




      $begingroup$
      GMTA .........great alike
      $endgroup$
      – Sunnyskyguy EE75
      11 hours ago








    1




    1




    $begingroup$
    GMTA .........great alike
    $endgroup$
    – Sunnyskyguy EE75
    11 hours ago




    $begingroup$
    GMTA .........great alike
    $endgroup$
    – Sunnyskyguy EE75
    11 hours ago













    4












    $begingroup$

    Something else to consider is to build a relaxation oscillator using a diac, capacitor, LED, couple of resistors.





    schematic



    Diacs are still readily available, although Digikey wants to sell them in full reels. They can be found at most electronic suppliers as well as places like eBay, aliexpress, banggood, deal extreme.



    The advantage of using a relaxation oscillator rather than driving the LED with a large-value resistor is that the LED remains visible (flashing) with low voltages applied. It will stop flashing when the input voltage drops below the sum of the diac trigger voltage and the LED forward voltage,








    share|improve this answer









    $endgroup$













    • $begingroup$
      Probably the best solution. Only maybe R1 should be 10 M or even more, and the cap under 1uF. Also there are LEDs with 100X light output than the listed one, so R2 can be increased too, which would save power.
      $endgroup$
      – Ale..chenski
      8 hours ago












    • $begingroup$
      I normally use very-high-brightness LEDs. The part number on my schematic is simply what the built-in CAD package has as a default.
      $endgroup$
      – Dwayne Reid
      8 hours ago










    • $begingroup$
      You have to keep the discharge current high enough to ensure that the diac switches cleanly from conducting to not conducting. In other words, R2 has to remain fairly low value. But higher brightness is better anyway.
      $endgroup$
      – Dwayne Reid
      8 hours ago
















    4












    $begingroup$

    Something else to consider is to build a relaxation oscillator using a diac, capacitor, LED, couple of resistors.





    schematic



    Diacs are still readily available, although Digikey wants to sell them in full reels. They can be found at most electronic suppliers as well as places like eBay, aliexpress, banggood, deal extreme.



    The advantage of using a relaxation oscillator rather than driving the LED with a large-value resistor is that the LED remains visible (flashing) with low voltages applied. It will stop flashing when the input voltage drops below the sum of the diac trigger voltage and the LED forward voltage,








    share|improve this answer









    $endgroup$













    • $begingroup$
      Probably the best solution. Only maybe R1 should be 10 M or even more, and the cap under 1uF. Also there are LEDs with 100X light output than the listed one, so R2 can be increased too, which would save power.
      $endgroup$
      – Ale..chenski
      8 hours ago












    • $begingroup$
      I normally use very-high-brightness LEDs. The part number on my schematic is simply what the built-in CAD package has as a default.
      $endgroup$
      – Dwayne Reid
      8 hours ago










    • $begingroup$
      You have to keep the discharge current high enough to ensure that the diac switches cleanly from conducting to not conducting. In other words, R2 has to remain fairly low value. But higher brightness is better anyway.
      $endgroup$
      – Dwayne Reid
      8 hours ago














    4












    4








    4





    $begingroup$

    Something else to consider is to build a relaxation oscillator using a diac, capacitor, LED, couple of resistors.





    schematic



    Diacs are still readily available, although Digikey wants to sell them in full reels. They can be found at most electronic suppliers as well as places like eBay, aliexpress, banggood, deal extreme.



    The advantage of using a relaxation oscillator rather than driving the LED with a large-value resistor is that the LED remains visible (flashing) with low voltages applied. It will stop flashing when the input voltage drops below the sum of the diac trigger voltage and the LED forward voltage,








    share|improve this answer









    $endgroup$



    Something else to consider is to build a relaxation oscillator using a diac, capacitor, LED, couple of resistors.





    schematic



    Diacs are still readily available, although Digikey wants to sell them in full reels. They can be found at most electronic suppliers as well as places like eBay, aliexpress, banggood, deal extreme.



    The advantage of using a relaxation oscillator rather than driving the LED with a large-value resistor is that the LED remains visible (flashing) with low voltages applied. It will stop flashing when the input voltage drops below the sum of the diac trigger voltage and the LED forward voltage,









    share|improve this answer












    share|improve this answer



    share|improve this answer










    answered 10 hours ago









    Dwayne ReidDwayne Reid

    18.2k21949




    18.2k21949












    • $begingroup$
      Probably the best solution. Only maybe R1 should be 10 M or even more, and the cap under 1uF. Also there are LEDs with 100X light output than the listed one, so R2 can be increased too, which would save power.
      $endgroup$
      – Ale..chenski
      8 hours ago












    • $begingroup$
      I normally use very-high-brightness LEDs. The part number on my schematic is simply what the built-in CAD package has as a default.
      $endgroup$
      – Dwayne Reid
      8 hours ago










    • $begingroup$
      You have to keep the discharge current high enough to ensure that the diac switches cleanly from conducting to not conducting. In other words, R2 has to remain fairly low value. But higher brightness is better anyway.
      $endgroup$
      – Dwayne Reid
      8 hours ago


















    • $begingroup$
      Probably the best solution. Only maybe R1 should be 10 M or even more, and the cap under 1uF. Also there are LEDs with 100X light output than the listed one, so R2 can be increased too, which would save power.
      $endgroup$
      – Ale..chenski
      8 hours ago












    • $begingroup$
      I normally use very-high-brightness LEDs. The part number on my schematic is simply what the built-in CAD package has as a default.
      $endgroup$
      – Dwayne Reid
      8 hours ago










    • $begingroup$
      You have to keep the discharge current high enough to ensure that the diac switches cleanly from conducting to not conducting. In other words, R2 has to remain fairly low value. But higher brightness is better anyway.
      $endgroup$
      – Dwayne Reid
      8 hours ago
















    $begingroup$
    Probably the best solution. Only maybe R1 should be 10 M or even more, and the cap under 1uF. Also there are LEDs with 100X light output than the listed one, so R2 can be increased too, which would save power.
    $endgroup$
    – Ale..chenski
    8 hours ago






    $begingroup$
    Probably the best solution. Only maybe R1 should be 10 M or even more, and the cap under 1uF. Also there are LEDs with 100X light output than the listed one, so R2 can be increased too, which would save power.
    $endgroup$
    – Ale..chenski
    8 hours ago














    $begingroup$
    I normally use very-high-brightness LEDs. The part number on my schematic is simply what the built-in CAD package has as a default.
    $endgroup$
    – Dwayne Reid
    8 hours ago




    $begingroup$
    I normally use very-high-brightness LEDs. The part number on my schematic is simply what the built-in CAD package has as a default.
    $endgroup$
    – Dwayne Reid
    8 hours ago












    $begingroup$
    You have to keep the discharge current high enough to ensure that the diac switches cleanly from conducting to not conducting. In other words, R2 has to remain fairly low value. But higher brightness is better anyway.
    $endgroup$
    – Dwayne Reid
    8 hours ago




    $begingroup$
    You have to keep the discharge current high enough to ensure that the diac switches cleanly from conducting to not conducting. In other words, R2 has to remain fairly low value. But higher brightness is better anyway.
    $endgroup$
    – Dwayne Reid
    8 hours ago











    4












    $begingroup$

    example of a reliable economical no-power-supply (< $10) indicator solution that does not cost > $200 like the other meters. :(



    Since this coil draws 50uA full scale it is equivalent to 10V/50uA= 200kOhm. and thus at 1kV the R load is 50 mW full scale with 1kV/50uA = 20MOhm 1% or +/-200kOhm.





    schematic





    simulate this circuit – Schematic created using CircuitLab



    It also draws the least current and is readily available.



    enter image description here






    share|improve this answer











    $endgroup$


















      4












      $begingroup$

      example of a reliable economical no-power-supply (< $10) indicator solution that does not cost > $200 like the other meters. :(



      Since this coil draws 50uA full scale it is equivalent to 10V/50uA= 200kOhm. and thus at 1kV the R load is 50 mW full scale with 1kV/50uA = 20MOhm 1% or +/-200kOhm.





      schematic





      simulate this circuit – Schematic created using CircuitLab



      It also draws the least current and is readily available.



      enter image description here






      share|improve this answer











      $endgroup$
















        4












        4








        4





        $begingroup$

        example of a reliable economical no-power-supply (< $10) indicator solution that does not cost > $200 like the other meters. :(



        Since this coil draws 50uA full scale it is equivalent to 10V/50uA= 200kOhm. and thus at 1kV the R load is 50 mW full scale with 1kV/50uA = 20MOhm 1% or +/-200kOhm.





        schematic





        simulate this circuit – Schematic created using CircuitLab



        It also draws the least current and is readily available.



        enter image description here






        share|improve this answer











        $endgroup$



        example of a reliable economical no-power-supply (< $10) indicator solution that does not cost > $200 like the other meters. :(



        Since this coil draws 50uA full scale it is equivalent to 10V/50uA= 200kOhm. and thus at 1kV the R load is 50 mW full scale with 1kV/50uA = 20MOhm 1% or +/-200kOhm.





        schematic





        simulate this circuit – Schematic created using CircuitLab



        It also draws the least current and is readily available.



        enter image description here







        share|improve this answer














        share|improve this answer



        share|improve this answer








        edited 8 hours ago

























        answered 9 hours ago









        Sunnyskyguy EE75Sunnyskyguy EE75

        70.6k226103




        70.6k226103























            3












            $begingroup$

            Another potential option is to use a neon bulb or lamp. The common neon indicator that I used to use is the NE-2H - this has fairly-wide current capability and would be able to handle the current range of caused by the supply voltage changing from less than 100V up to 1000V.



            The downside is that a neon indicator does not match your requirement of indicating down to 40 Vdc. The NE-2H extinguishes (after being lit) at about 60 Vdc.



            NE-2 & NE-2H indicators are still readily available. There are also much larger neon bulbs and lamps but they may not be readily available any longer. But you can check.



            Final downside of a neon indicator is that they do die after an extended time. You have to weigh the consequences of the indicator failing some time in the future. Do note that they fail "gracefully" - they don't fail completely at one time, but rather, degrade. You would use that degradation as an indication that the lamp needs to be replaced.






            share|improve this answer









            $endgroup$













            • $begingroup$
              I had considered this but discarded it due to the V range must be <<1mA with 1M series R is barely visible at 50uA , but then when it wears out you can reverse it and use the other electrode to illuminate. ha.
              $endgroup$
              – Sunnyskyguy EE75
              10 hours ago










            • $begingroup$
              I had considered suggesting a simple neon relaxation oscillator but the downside is that the minimum operating voltage would be about 90 Vdc. But it doesn't get much simpler than that - and remains quite visible even with low supply voltage.
              $endgroup$
              – Dwayne Reid
              9 hours ago










            • $begingroup$
              Will the neon work on DC power?
              $endgroup$
              – Harper
              4 hours ago










            • $begingroup$
              Yes. Neon works well on DC supply. However, only one electrode illuminates. Neon relaxation oscillator works only with DC power. But minimum operating voltage for relaxation oscillator is the firing voltage of the neon bulb - about 90 Vdc for NE-2H.
              $endgroup$
              – Dwayne Reid
              4 hours ago
















            3












            $begingroup$

            Another potential option is to use a neon bulb or lamp. The common neon indicator that I used to use is the NE-2H - this has fairly-wide current capability and would be able to handle the current range of caused by the supply voltage changing from less than 100V up to 1000V.



            The downside is that a neon indicator does not match your requirement of indicating down to 40 Vdc. The NE-2H extinguishes (after being lit) at about 60 Vdc.



            NE-2 & NE-2H indicators are still readily available. There are also much larger neon bulbs and lamps but they may not be readily available any longer. But you can check.



            Final downside of a neon indicator is that they do die after an extended time. You have to weigh the consequences of the indicator failing some time in the future. Do note that they fail "gracefully" - they don't fail completely at one time, but rather, degrade. You would use that degradation as an indication that the lamp needs to be replaced.






            share|improve this answer









            $endgroup$













            • $begingroup$
              I had considered this but discarded it due to the V range must be <<1mA with 1M series R is barely visible at 50uA , but then when it wears out you can reverse it and use the other electrode to illuminate. ha.
              $endgroup$
              – Sunnyskyguy EE75
              10 hours ago










            • $begingroup$
              I had considered suggesting a simple neon relaxation oscillator but the downside is that the minimum operating voltage would be about 90 Vdc. But it doesn't get much simpler than that - and remains quite visible even with low supply voltage.
              $endgroup$
              – Dwayne Reid
              9 hours ago










            • $begingroup$
              Will the neon work on DC power?
              $endgroup$
              – Harper
              4 hours ago










            • $begingroup$
              Yes. Neon works well on DC supply. However, only one electrode illuminates. Neon relaxation oscillator works only with DC power. But minimum operating voltage for relaxation oscillator is the firing voltage of the neon bulb - about 90 Vdc for NE-2H.
              $endgroup$
              – Dwayne Reid
              4 hours ago














            3












            3








            3





            $begingroup$

            Another potential option is to use a neon bulb or lamp. The common neon indicator that I used to use is the NE-2H - this has fairly-wide current capability and would be able to handle the current range of caused by the supply voltage changing from less than 100V up to 1000V.



            The downside is that a neon indicator does not match your requirement of indicating down to 40 Vdc. The NE-2H extinguishes (after being lit) at about 60 Vdc.



            NE-2 & NE-2H indicators are still readily available. There are also much larger neon bulbs and lamps but they may not be readily available any longer. But you can check.



            Final downside of a neon indicator is that they do die after an extended time. You have to weigh the consequences of the indicator failing some time in the future. Do note that they fail "gracefully" - they don't fail completely at one time, but rather, degrade. You would use that degradation as an indication that the lamp needs to be replaced.






            share|improve this answer









            $endgroup$



            Another potential option is to use a neon bulb or lamp. The common neon indicator that I used to use is the NE-2H - this has fairly-wide current capability and would be able to handle the current range of caused by the supply voltage changing from less than 100V up to 1000V.



            The downside is that a neon indicator does not match your requirement of indicating down to 40 Vdc. The NE-2H extinguishes (after being lit) at about 60 Vdc.



            NE-2 & NE-2H indicators are still readily available. There are also much larger neon bulbs and lamps but they may not be readily available any longer. But you can check.



            Final downside of a neon indicator is that they do die after an extended time. You have to weigh the consequences of the indicator failing some time in the future. Do note that they fail "gracefully" - they don't fail completely at one time, but rather, degrade. You would use that degradation as an indication that the lamp needs to be replaced.







            share|improve this answer












            share|improve this answer



            share|improve this answer










            answered 10 hours ago









            Dwayne ReidDwayne Reid

            18.2k21949




            18.2k21949












            • $begingroup$
              I had considered this but discarded it due to the V range must be <<1mA with 1M series R is barely visible at 50uA , but then when it wears out you can reverse it and use the other electrode to illuminate. ha.
              $endgroup$
              – Sunnyskyguy EE75
              10 hours ago










            • $begingroup$
              I had considered suggesting a simple neon relaxation oscillator but the downside is that the minimum operating voltage would be about 90 Vdc. But it doesn't get much simpler than that - and remains quite visible even with low supply voltage.
              $endgroup$
              – Dwayne Reid
              9 hours ago










            • $begingroup$
              Will the neon work on DC power?
              $endgroup$
              – Harper
              4 hours ago










            • $begingroup$
              Yes. Neon works well on DC supply. However, only one electrode illuminates. Neon relaxation oscillator works only with DC power. But minimum operating voltage for relaxation oscillator is the firing voltage of the neon bulb - about 90 Vdc for NE-2H.
              $endgroup$
              – Dwayne Reid
              4 hours ago


















            • $begingroup$
              I had considered this but discarded it due to the V range must be <<1mA with 1M series R is barely visible at 50uA , but then when it wears out you can reverse it and use the other electrode to illuminate. ha.
              $endgroup$
              – Sunnyskyguy EE75
              10 hours ago










            • $begingroup$
              I had considered suggesting a simple neon relaxation oscillator but the downside is that the minimum operating voltage would be about 90 Vdc. But it doesn't get much simpler than that - and remains quite visible even with low supply voltage.
              $endgroup$
              – Dwayne Reid
              9 hours ago










            • $begingroup$
              Will the neon work on DC power?
              $endgroup$
              – Harper
              4 hours ago










            • $begingroup$
              Yes. Neon works well on DC supply. However, only one electrode illuminates. Neon relaxation oscillator works only with DC power. But minimum operating voltage for relaxation oscillator is the firing voltage of the neon bulb - about 90 Vdc for NE-2H.
              $endgroup$
              – Dwayne Reid
              4 hours ago
















            $begingroup$
            I had considered this but discarded it due to the V range must be <<1mA with 1M series R is barely visible at 50uA , but then when it wears out you can reverse it and use the other electrode to illuminate. ha.
            $endgroup$
            – Sunnyskyguy EE75
            10 hours ago




            $begingroup$
            I had considered this but discarded it due to the V range must be <<1mA with 1M series R is barely visible at 50uA , but then when it wears out you can reverse it and use the other electrode to illuminate. ha.
            $endgroup$
            – Sunnyskyguy EE75
            10 hours ago












            $begingroup$
            I had considered suggesting a simple neon relaxation oscillator but the downside is that the minimum operating voltage would be about 90 Vdc. But it doesn't get much simpler than that - and remains quite visible even with low supply voltage.
            $endgroup$
            – Dwayne Reid
            9 hours ago




            $begingroup$
            I had considered suggesting a simple neon relaxation oscillator but the downside is that the minimum operating voltage would be about 90 Vdc. But it doesn't get much simpler than that - and remains quite visible even with low supply voltage.
            $endgroup$
            – Dwayne Reid
            9 hours ago












            $begingroup$
            Will the neon work on DC power?
            $endgroup$
            – Harper
            4 hours ago




            $begingroup$
            Will the neon work on DC power?
            $endgroup$
            – Harper
            4 hours ago












            $begingroup$
            Yes. Neon works well on DC supply. However, only one electrode illuminates. Neon relaxation oscillator works only with DC power. But minimum operating voltage for relaxation oscillator is the firing voltage of the neon bulb - about 90 Vdc for NE-2H.
            $endgroup$
            – Dwayne Reid
            4 hours ago




            $begingroup$
            Yes. Neon works well on DC supply. However, only one electrode illuminates. Neon relaxation oscillator works only with DC power. But minimum operating voltage for relaxation oscillator is the firing voltage of the neon bulb - about 90 Vdc for NE-2H.
            $endgroup$
            – Dwayne Reid
            4 hours ago










            Nikolay is a new contributor. Be nice, and check out our Code of Conduct.










            draft saved

            draft discarded


















            Nikolay is a new contributor. Be nice, and check out our Code of Conduct.













            Nikolay is a new contributor. Be nice, and check out our Code of Conduct.












            Nikolay is a new contributor. Be nice, and check out our Code of Conduct.
















            Thanks for contributing an answer to Electrical Engineering Stack Exchange!


            • Please be sure to answer the question. Provide details and share your research!

            But avoid



            • Asking for help, clarification, or responding to other answers.

            • Making statements based on opinion; back them up with references or personal experience.


            Use MathJax to format equations. MathJax reference.


            To learn more, see our tips on writing great answers.




            draft saved


            draft discarded














            StackExchange.ready(
            function () {
            StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2felectronics.stackexchange.com%2fquestions%2f430950%2fhigh-voltage-led-indicator-40-1000-vdc-without-additional-power-supply%23new-answer', 'question_page');
            }
            );

            Post as a guest















            Required, but never shown





















































            Required, but never shown














            Required, but never shown












            Required, but never shown







            Required, but never shown

































            Required, but never shown














            Required, but never shown












            Required, but never shown







            Required, but never shown







            Popular posts from this blog

            El tren de la libertad Índice Antecedentes "Porque yo decido" Desarrollo de la...

            Castillo d'Acher Características Menú de navegación

            Puerta de Hutt Referencias Enlaces externos Menú de navegación15°58′00″S 5°42′00″O /...